Removing debris from tall structures and high-rise buildings safely, efficiently and cost-effectively is pretty challenging. While metal dumpsters might be suited to getting rid of walk out debris on construction sites, they are way overweight, cumbersome and bulky to be hoisted on rooftops or to clear debris located several stories above ground.
Using chutes to slide debris down into a dumpster isn’t the best solution either for all reasons. First, maintaining chutes in good working order is labor intensive and requires frequent repairs because of the friction, tearing, and damage that sharp objects and abrasive materials commonly found in industrial debris could cause to the chute fabric while they slide down. In addition, dumping debris down a chute from an elevation generates lots of airborne particles, dust and pollution that may present a substantial health hazard to workers and the overall public.
Fortunately, you can find new special debris removal dumpster bags available on the market which can be perfectly suited to this task and are ideal for the roofing and construction industry. These lightweight dumpster bags weigh under 10 lbs and measure roughly 36″ in width, length and height respectively. They are frame-less, self-standing and unlike other flexible dumpsters and traditional metal containers available on the market, they are so light and compact, that they may easily be deployed by one individual in under five full minutes on any rooftop, even on the tallest high rise buildings.
Despite their compact size, these reusable FIBCs (Flexible Intermediate Bulk Containers) can haul amazing quantities of debris from rooftops over and once again without falling apart odvoz odpadu. With a loading capacity of 2,200 lbs and a volume capacity of 27 cubic feet, they could hold virtually almost any abrasive or sharp material generated on a construction site, including jumbo sized debris such as broken glass, torn metal, splintered wood, sheet-rock, cement chunks and much more. Since they are created from woven polypropylene, these dumpster bags are rip resistant and will not burst open even if the bags are punctured while being lowered to the ground by crane or while suspended in mid air. The straps that support these specialized FIBC bags are even tougher. They are made to withstand 6,000 lbs of pressure and are manufactured from the exact same kind of nylon material utilized by car manufacturers for seat belts.
In addition, these special FIBC bags are equipped with a safe and easy to use dump bottom mechanism. This provides them a substantial edge with regards to discharge rate. Once a case is filled up with debris and lowered to walk out, its contents could be quickly emptied in to a traditional dumpster or even a truck by simply releasing a few straps. This forces the underside of the bag to spread available and the contents to spill out while the crane lifts the bag back as much as the rooftop for another load.
These bags are fully customizable. Upon request the maker can modify them to match a customer’s specific needs. This includes altering the size of bags in addition to how many straps for added support. Obviously, the bags are not just ideal for removing debris from rooftops. They are also perfectly suited to removing debris at walk out, on steep inclines or even below ground.
The maker of these specialized debris removal bags happens to be supplying a free sample bag with the purchase of three or maybe more bags, so if you are starting a fresh construction, remodeling or renovation project and you’ll need a cost-effective alternative to traditional metal dumpsters take full advantage of their free sample and compare how fast and efficiently you can clear debris from a site with these new and improved flexible dumpster bags.